1
1451 Belcher Road South, Largo, FL 33773 • USA
• Tel +1 (727) 447-6140 • Fax (727) 442-5699 •
[email protected]F-2600 & F-2700 Vortex Flow Meter Manual 02/15 - 0808-7 / 19204 Page 18
1.3.2 Line Size / Process Connections / Materials
The in-line model is built for line sizes ½" through 4" wafer or ½" through 8" anged
design using ANSI 150, 300, 600, PN16, 40, or 64 class anges.
The insertion model can be used in line sizes 2" and greater and is built with a packing
gland design using 2" NPT, or 2" anged connections (ANSI 150, 300, 600, PN16, 40, or 64
class anges). The packing gland design can be ordered with a permanent or removable
retractor.
The standard in-line model is built with 316L stainless steel, A105 carbon steel and
Hastelloy C-276 versions are available via special order. The insertion model is built with
316L stainless steel.
1.3.3 Flow Meter Electronics
The ow meter electronics are available mounted directly to the ow body, or mounted
remotely. The electronics housing may be used indoors or outdoors, including wet
environments. Available input power options are: DC loop powered (2-wire), DC powered,
or AC powered. Three analog output signals are available for your choice of three of the
ve process variables: mass ow rate, volumetric ow rate, temperature, pressure or uid
density. A pulse output signal for remote totalization and BACnet, MODBUS or HART
communications is also available.
Each meter includes a local 2 x 16 character LCD display housed within the enclosure.
Local operation and reconguration is accomplished using six pushbuttons operated via
nger touch. For hazardous locations, the six buttons can be operated with the electronics
enclosure sealed using a hand-held magnet, thereby not compromising the integrity of the
hazardous location certication.
The electronics include nonvolatile memory that stores all conguration information. The
nonvolatile memory allows the ow meter to function immediately upon power up or after
an interruption in power. All owmeters are calibrated and congured for the customer’s
ow application.
Comentários a estes Manuais