Onicon F-3100 Series Manual do Utilizador descarregar pdf (Página 26)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]

F-3100 Flow Meter Manual 06/14 - 0670-7 Page 26

3.2.8 Remote Mount Transmitter

Remote mount transmitters are provided with a single “L” bracket with two ¼” mounting

holes. The bracket is secured to the transmitter by means of a large bolt with a knurled

knob for a head. To mount the bracket, rst separate it from the transmitter housing and

attach it to the wall or other vertical surface. Cable from the sensor body is attached to the

transmitter using the center strain relief.

CAUTION

DO NOT drill holes in the transmitter. Use only the openings that are provided. DO NOT cut the

remote cable. Coil excess cable at one end.

2.5”

1”

0.25” DIA

Insert

2.5”

Install sensor

cable here

0.25” Diameter

3”

Mounting Bracket

Cable is supplied

already attached to

the sensor body.

Cable wires are

labeled with numbers

which correspond to

connection terminals

on the transmitter.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

Sem comentários

Onicon F-3100 Series Manual do Utilizador Página 26