Onicon System-10 P1 Manual do Utilizador descarregar pdf (Página 32)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • [email protected]

System-10-P1 Manual 10/14 - 0656-9 / 18320 Page 32

STEP ACTION REACTION COMMENT

Once the correct value has been

entered, press PROGRAM.

The P1 APP No page will

appear with the rst digit of

the address ashing.

Do not change the P1

app number without rst

consulting ONICON.

10 Press the PROGRAM button.

The FM LOCN page appears

with UNKNWN defaulted as

the current location.

The PROGRAM button is on

the front panel.

11 Press the SCROLL button.

The setting will toggle be-

tween UNKNWN, SUPPLY,

and RETURN.

Select the appropriate FM

LOCN.

12 Press the PROGRAM button.

The FRONT PANEL RESET

page appears.

Do not change this setting

unless you wish to enable

the front panel totalizer reset

button.

13 Press the PROGRAM button.

The SAVE CHANGES page

appears.

The new settings must be

saved to take effect.

14 Press the SCROLL button.

The N changes to Y on the

SAVE CHANGES page.

The Y must be selected in

order for the new settings to

take effect.

15 Press the PROGRAM button.

The new settings are saved

and the display reverts to

the RUN mode.

Open the front panel and locate the

RESET switch. Press to reset the

System-10.

When polled, the System-10

will automatically begin

to communicate with the

network.

RESET is located along the top

of the heat computer board.

(See appendix page A-9.)

4.5.1 Application Number

The application number is assigned to the BTU meter based on the calibration parameters

supplied at the time the BTU meter was calibrated. If the system parameters change,

please contact ONICON for assistance in determining the correct application number.

TABLE OF STANDARD SYSTEM-10-P1 APPLICATION NUMBERS

Application

Number

Point 3 Displayed

Energy Rate

Points 9, 10

Displayed Energy

Total

Points 11, 12

Displayed Flow

Total

Point 4

Displayed Flow

Rate

Points 5, 6, 7

Displayed

Temperature

1998 BTU/HR x 1,000 BTU x 1,000 GAL x 10 GPM x 1 DEG F

1997 BTU/HR x 1,000 BTU x 10,000 GAL x 10 GPM x 1 DEG F

1996 BTU/HR x 1,000 BTU x 10,000 GAL x 100 GPM x 1 DEG F

1995 BTU/HR x 1,000 BTU x 10,000 GAL x 1,000 GPM x 1 DEG F

1994 BTU/HR x 1,000 BTU x 100,000 GAL x 100 GPM x 1 DEG F

1993 BTU/HR x 1,000 BTU x 100,000 GAL x 1,000 GPM x 1 DEG F

1992 BTU/HR x 1,000,000 BTU x 100,000 GAL x 1,000 GPM x 1 DEG F

1991 BTU/HR x 1,000,000 BTU x 100,000 GAL x 10,000 GPM x 1 DEG F

1990 BTU/HR x 1,000,000 BTU x 1,000,000 GAL x 1,000 GPM x 1 DEG F

1989 BTU/HR x 1,000,000 BTU x 1,000,000 GAL x 10,000 GPM x 1 DEG F

1988 BTU/HR x 1,000,000 BTU x 1,000,000 GAL x 10,000 GPM x 10 DEG F

1987 BTU/HR x 1,000 TON-HRS x 1 GAL x 100 GPM x 1 DEG F

1986 BTU/HR x 1,000 TON-HRS x 1 GAL x 1,000 GPM x 1 DEG F

1985 BTU/HR x 1,000 TON-HRS x 10 GAL x 1,000 GPM x 1 DEG F

1984 BTU/HR x 1,000,000 TON-HRS x 10 GAL x 1,000 GPM x 1 DEG F

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 66 67

Comentários a estes Manuais

Sem comentários

Onicon System-10 P1 Manual do Utilizador Página 32

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Onicon System-10 P1